Catnic Box Wall Lintel L2 BSD 2100mm

For 100mm Interior Solid Walls.

Offers a cost effective solution for standard duty loads.

Universal application caters for all loading conditions:

  • Direct floor or roof load
  • Supports concrete floor loads
  • Supports point loads e.g. steel beams
  • Duplex corrosion protection: Ensures optimum durability and longevity
  • Built in plaster key: Ensures excellent plaster adhesion and safety on site

Catnic Cavity Wall Extra Heavy Duty Lintel CH90 100 3600mm

  • Extra Heavy Duty
  • Internal insulation: Maximising thermal efficiency minimising cold bridging
  • Duplex corrosion protection: Ensures optimum durability and longevity
  • Built in DPC: Saves time in construction and means cavity is easy to clean without risk of damage to DPC
  • Built in plaster key: With staggered slots applied to the perforated steel baseplate

Technical Information

Inner Leaf: 100 – 115mm

Cavity: 90 – 105mm

Outer Leaf: 100 – 105mm

Catnic Timber Frame Lintels CTF9 1050mm

  • Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
  • The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
  • All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
  • Timber frame lintels should be suitable propped during construction.

Catnic Timber Frame Lintels CTF9 1200mm

  • Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
  • The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
  • All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
  • Timber frame lintels should be suitable propped during construction.

Catnic Timber Frame Lintels CTF9 1500mm

  • Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
  • The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
  • All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
  • Timber frame lintels should be suitable propped during construction.

Catnic Timber Frame Lintels CTF9 1650mm

  • Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
  • The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
  • All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
  • Timber frame lintels should be suitable propped during construction.

Catnic Timber Frame Lintels CTF9 1800mm

  • Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
  • The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
  • All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
  • Timber frame lintels should be suitable propped during construction.