The GRP (Glass Reinforced Polyester) external angle trim has been manufactured form strong fibre glass and is pre-formed and formulated for uses such as copings, flush trimming and neat internal angles and upstands. Additionally, it is used to conceal any features that sit perpendicular to the main roof or any other laminated surface.
Benefits
The GRP (Glass Reinforced Polyester) wall fillet trim has been manufactured from durable fibre glass and is designed to be applied where flat roof butts against an existing wall. Moreover, this trim creates a 45° angle to deflect rainwater.
Benefits
Our Diamond GRP roofing resin is a pre-accelerated, thixotropic, resin formulated for extremely low styrene emission. It is suitable for all types of flat roofs and vertical surfaces can be used in any domestic or commercial buildings providing the perfect all-weather and water protection.
Benefits
Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .
Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers. Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.
Thickness : 1.8mm
Weight: 18kg
Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .
Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers. Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.
Thickness : 1.8mm
Weight: 18kg
A Breathable Pitched Roof Underlay with Integral Tape suitable for all Wind Uplift Zones.
Approved for use in all 5 wind speed zones due to the unique integral acrylic tape that is applied when produced.
|
A Breathable Pitched Roof Underlay with Integral Tape suitable for all Wind Uplift Zones.
Approved for use in all 5 wind speed zones due to the unique integral acrylic tape that is applied when produced.
|
BBA certified heavy weight breathable roof tile underlay for warm and cold roof applications. Requires no ventilation if installed in accordance with instructions.
DuPont Tyvek Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs.
Tyvek Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications.
Tyvek Supro water resistant membrane products are designed to withstand prolonged UV radiation and high temperatures, and come with full BBA and IAB approval for use in all pitched roof constructions.
DuPont Tyvek Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs.
Tyvek Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications.
Tyvek Supro water resistant membrane products are designed to withstand prolonged UV radiation and high temperatures, and come with full BBA and IAB approval for use in all pitched roof constructions.
Please enter your postcode so we can tailor your shopping experience and show you the best prices in your location.
