Concrete blocks & lintels Archives

Thermalite Shield Block 100mm

Thermalite Shield Blocks deliver all the typical qualities of Thermalite blocks with excellent thermal performance and moisture resistance. The blocks are versatile and can be used in internal and external walls and foundations. They offer high thermal and sound insulation while also providing a sturdy, durable building material.

Benefits

For use with general purpose masonry
dimensions: 440mm x 215mm x 100mm
High Thermal Performance
For use in cavity walls, partition walls & foundations
Compressive Strength: 3.6N/mm²
Design: 0.15 W/m.K
Dry Density: 600 kg/m³
Eight Scratch markings to identify block

Medium Dense 3.6N Concrete Block Grey 100mm

This medium dense concrete block is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.

Floor Beams 155mm x 120mm

Solid Dense 7.3N Concrete Block Grey 140mm

Flat Top Path Edging EF 50mm x 150mm x 915mm

This high-quality concrete path edging creates boundaries for paths, driveways, lawns and garden beds. A durable paving supply, it creates a precise border for best results.

Solid Medium Dense 7.3N Concrete Block Grey 100mm

This solid medium dense concrete block is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.

Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 2700mm

Open back lintels are for use in cavity wall construction as it allows masonry to be built up continuously on both outer and inner leaf. The CX90/100 lintel supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry.

Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 2100mm

Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 1800mm

IG Lintel Heavy Duty 3200mm

HEAVY DUTY IG LINTEL LS/HD100 IG HEAVY DUTY lintels satisfy the thermal performance requirements of England and Wales’ Part L of the building regulations, Northern Ireland’s Part F and Scotland’s Technical Handbook, section 6. Our HEAVY DUTY L1 range has Psi values ranging from 0.2 to 0.3 W/m.k. The exact figure of your Psi value depends upon the wall construction the lintel is built into.

Benefits

Your postcode