Claylite 2400mm x 1200mm 75mm

75mm Claylite is an EPS compressible-fill material designed to minimise the pressure against foundations due to clay heave. Claylite board does not degrade when placed in high moisture zones and is resistant to the effects of freeze-thaw. Moreover, it will stay an efficient compressible-fill for the whole life of the structure

Here are some of the most common usages of this product:

  • Below concrete ground beams of maximum depth of 600mm
  • In piled foundation construction
  • On concrete foundations
  • Used to prevent potential issues in foundations due to moisture movement in soils
  • On the sides of trench fills

Benefits

  • Provides a rapid, cost-effective solution to clay-heave issues
  • Low-density expanded polystyrene board
  • Produced in light-green colour for easy identification
  • Durable & moisture resistant
  • Has ideal compression properties
  • Made up of a non-toxic material
  • Lightweight & easy to install

Cellcore HX B Under Beam EPS 12 x x2400 x 220mm

220mm Cellcore HX B Under Beam is specially designed to provide foundation protection from ground heave effects when installed beneath reinforced ground beams and pile caps. It is consisted of specially moulded hexagonal cellular Filcor expended polystyrene, available in a number of different depths and grades. Ground movement is caused by the rehydration of clay or expansive shale soils, overburden recovery resulting from deep excavations or, in certain parts of the world, permafrost heave.

EPS Polystyrene Insulation Board 75mm x 2400mm x 1200mm

75mm EPS Silver board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

Xtratherm 90mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

90mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

Xtratherm 100mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

100mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

EPS Polystyrene Insulation Board 60mm x 2400mm x 1200mm

60mm EPS70 board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

Kingspan Kooltherm K108 Cavity Insulation Board PK6 450mm x 1200MM x 75mm

Kingspan Kooltherm K108 Cavity Board is a premium performance lower lambda insulation with a rigid thermoset fibre-free phenolic core. It is faced on both sides with a low emissivity composite foil facing and is used in partially filled cavity walls. Thermal conductivity – 0.018 W/m.K Facings – Composite foil Core – Premium performance lower-lambda rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP). Board size – 1200mm x 450mm

EPS100 Polystyrene Insulation Board Jablite 50mm x 2.400mm x 1200mm

50mm Jablite EPS 100 board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.