knauf Loft Roll Combi 44 200mm 6.84m2

The 200mm thick Loft Roll 44 by Knauf is ideal for the rigorous thermal insulation of pitched roofs at ceiling level. A highly versatile, energy saving choice, it is also suitable for floor insulation. When used at ceiling level, it is typically fitted in two layers, with the first layer positioned between the joists and the second layer over and at right angles to the joists.

This high-performance product consists of a flexible low-density glass mineral wool quilt, which is lightweight, resilient and non-combustible. The rolls are 1140mm wide and partially perforated to produce either two rolls that are 570mm wide or three rolls 380mm wide, making this a highly convenient, endlessly versatile solution.

Acoustilay 15 1200mm x 1200mm x 15mm

1200mm x 1200mm x 15mm (21.6kg per sheet)

Acoustilay 15 is a premium acoustic floor treatment which has been the market leader for many years. Acoustilay is highly effective for treating both airborne and impact sound transmission through a floor.

This acoustic underlay is supplied onto domestic, residential and commercial flooring products. The underlay is a popular product due to its superior performance and quick installation. Acoustilay 15 will show noticeable performance over basic floor constructions and give significant improvement laid over existing structures.

Acoustilay 15 can also be used as part of an acoustic or soundproofing system for an entire floor specification.

  • This product improves airborne sound insulation
  • Fantastic material for reducing impact noise
  • Acoustilay 15 is simply laid under most floor finishes, Including wood and Vinyl
  • The material is easily cut and shaped for easy installation
  • This premium underlay minimises the increase in floor level
  • Recommended by architects and specifiers to meet Part E of the building regulations
  • This product allows access to an existing floor
  • Made from 100% recyclable materials
  • 100% sourced and manufactured in the UK

Claylite 2400mm x 1200mm 75mm

75mm Claylite is an EPS compressible-fill material designed to minimise the pressure against foundations due to clay heave. Claylite board does not degrade when placed in high moisture zones and is resistant to the effects of freeze-thaw. Moreover, it will stay an efficient compressible-fill for the whole life of the structure

Here are some of the most common usages of this product:

  • Below concrete ground beams of maximum depth of 600mm
  • In piled foundation construction
  • On concrete foundations
  • Used to prevent potential issues in foundations due to moisture movement in soils
  • On the sides of trench fills

Benefits

  • Provides a rapid, cost-effective solution to clay-heave issues
  • Low-density expanded polystyrene board
  • Produced in light-green colour for easy identification
  • Durable & moisture resistant
  • Has ideal compression properties
  • Made up of a non-toxic material
  • Lightweight & easy to install

Cellcore HX B Under Beam EPS 12 x x2400 x 220mm

220mm Cellcore HX B Under Beam is specially designed to provide foundation protection from ground heave effects when installed beneath reinforced ground beams and pile caps. It is consisted of specially moulded hexagonal cellular Filcor expended polystyrene, available in a number of different depths and grades. Ground movement is caused by the rehydration of clay or expansive shale soils, overburden recovery resulting from deep excavations or, in certain parts of the world, permafrost heave.

EPS Polystyrene Insulation Board 75mm x 2400mm x 1200mm

75mm EPS Silver board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

Xtratherm 90mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

90mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

Xtratherm 100mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

100mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

EPS Polystyrene Insulation Board 60mm x 2400mm x 1200mm

60mm EPS70 board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

ROCKWOOL RW3 Acoustic Insulation Slabs 75mm 4.32m2

The Rockwool RW Slab range is used for thermal, acoustic and fire insulation in general building applications, certified to EN 13162. The product range consists of high quality resin bonded slabs in a variety of thicknesses and densities.

Rockwool RW Slabs offers excellent thermal, acoustic & fire insulation, is water repellent, durable, cost effective, easy to handle and install.

Rockwool RW semi-rigid and rigid slabs are high quality resin bonded slabs that can be used for thermal and acoustic insulation in general building applications. The slabs are available in a wide range of thicknesses and densities to suit most requirements and are CE marked to EN 13162.

Kingspan Kooltherm K108 Cavity Insulation Board PK6 450mm x 1200MM x 75mm

Kingspan Kooltherm K108 Cavity Board is a premium performance lower lambda insulation with a rigid thermoset fibre-free phenolic core. It is faced on both sides with a low emissivity composite foil facing and is used in partially filled cavity walls. Thermal conductivity – 0.018 W/m.K Facings – Composite foil Core – Premium performance lower-lambda rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP). Board size – 1200mm x 450mm