Cavity Size 110 – 100mm
QMG Category: Metal lintels
Cavity Wall Extra Heavy Duty Lintel 110/100 2750mm
Cavity Size 110 – 100mm
Cavity Wall Heavy Duty Lintel 110/100 2000mm
Cavity Size 110 – 100mm
Cavity Wall Heavy Duty Lintel 110/100 2100mm
Cavity Size 110 – 100mm
Cavity Wall Heavy Duty Lintel 110/100 1500mm
Cavity Size 110 – 100mm
Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 2700mm
Open back lintels are for use in cavity wall construction as it allows masonry to be built up continuously on both outer and inner leaf. The CX90/100 lintel supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry.
Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 2100mm
Open back lintels are for use in cavity wall construction as it allows masonry to be built up continuously on both outer and inner leaf. The CX90/100 lintel supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry.
Catnic Cavity Wall Extra Heavy Duty Lintel CX90 100mm 1800mm
Open back lintels are for use in cavity wall construction as it allows masonry to be built up continuously on both outer and inner leaf. The CX90/100 lintel supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry.
IG Lintel Heavy Duty 3200mm
HEAVY DUTY IG LINTEL LS/HD100 IG HEAVY DUTY lintels satisfy the thermal performance requirements of England and Wales’ Part L of the building regulations, Northern Ireland’s Part F and Scotland’s Technical Handbook, section 6. Our HEAVY DUTY L1 range has Psi values ranging from 0.2 to 0.3 W/m.k. The exact figure of your Psi value depends upon the wall construction the lintel is built into.
IG Lintel Heavy Duty 2400mm
HEAVY DUTY IG LINTEL L1 HD 100 .All IG heavy duty lintels satisfy the thermal performance requirements of England and Wales’ Part L of the building regulations, Northern Ireland’s Part F and Scotland’s Technical Handbook, section 6. Our Heavy Duty L1 range has Psi values ranging from 0.2 to 0.3 W/m.k. The exact figure of your Psi value depends upon the wall construction the lintel is built into.
