QMG Category: Plasterboard

Mannok 100mm PIR Insulation

Mannok Therm Floor / MF insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing.

The high compressive strength of Mannok Therm Floor / MF enables it to withstand the dead and imposed loads transmitted through the floor.

Mannok Therm Floor / MF is suitable for new build and refurbishments projects in both domestic and commercial build. With specific properties that optimise the performance of underfloor heating.

For suspended timber floors in particular, Mannok Therm Floor / MF reduces heat loss by an air infiltration method, making it the ideal solution for upgrading the thermal performance of existing floors.

Magply A1 Non-Combustible Board 2400mm x 1200mm x 12mm

This Magply board is a high-performance Magnesium Oxide Building Board Euroclass A1 Non-Combustible rating. Thus, it offers a fire-safe and environmentally friendly substitute to conventional wood, plywood or OSB products. Using our Magply Non-Combustible Boards you have the assurance of a reliable foundation meaning not only a stunning render finish but also the peace of mind that it will last for years and stay crack-free.

As this type of board is environmentally friendly and 100% fire-safe, it can be used in a lot of projects and systems. For example:

  • Render
  • Timber Frame
  • Spandrel Panel
  • Tile Backer
  • Drylining
  • Roofing

18mm 2.400mm x 1.200mm Versapanel Cement Bonded Particle Board

Thickness: 18mm
Width: 1200mm
Length: 2400mm
Coverage: 2.88m2
Density: 1300kg/m3
Weight/m2: 23.4kg
Weight: 67.39kg
Thermal Conductivity: 0.026W/mK
R-Value: 0.69m2K/W
Airborne sound reduction: 33
Fire Rating (Reaction to Fire): B(Class 0)
Fire Protection (Resistance to Fire): 60minutes
Compressive Strength: 150kPa

 

18mm Versapanel cement bonded particle board is an innovative building material that is durable and flexible and meet the requirements of moisture tolerance and fire resistance. It is manufactured from wood particles and cement and has no asbestos or other hazardous volatiles. The board has smooth grey surface and is available in two basic finishes unsanded (suitable for many decorative finishes) and calibrated (sanded on both sides). The panel is easy to use in external and internal applications due to its flexibility–can be nailed, screwed, drilled, routed, sanded, planed or sawn. It is not subject to weather influences and also provides a level of airborne sound reduction–can be used to comply with the applicable regulations. Very high compressive strength of 15N/mm2