Diamond GRP Angle Trim

The GRP (Glass Reinforced Polyester) external angle trim has been manufactured form strong fibre glass and is pre-formed and formulated for uses such as copings, flush trimming and neat internal angles and upstands. Additionally, it is used to conceal any features that sit perpendicular to the main roof or any other laminated surface.

Benefits

  • Fire resistant
  • UV resistant
  • Weatherproof
  • Resists heavy foot traffic
  • Ideal for flat roofs
  • Easy to apply & lightweight
  • Load bearing
  • Measures 3m in length

Diamond GRP wall fillet trim

The GRP (Glass Reinforced Polyester) wall fillet trim has been manufactured from durable fibre glass and is designed to be applied where flat roof butts against an existing wall. Moreover, this trim creates a 45° angle to deflect rainwater.

Benefits

  • Made up of high-quality fibre glass
  • Applied where a flat roof butts against an existing wall
  • Creates a 45° angle to deflect rainwater
  • Lightweight & durable
  • Easy to apply
  • UV resistant
  • Crack-resistant
  • Long-lasting
  • Measures 3m in length

Diamond GRP Roofing Resin Base Coat 20kg

Our Diamond GRP roofing resin is a pre-accelerated, thixotropic, resin formulated for extremely low styrene emission. It is suitable for all types of flat roofs and vertical surfaces can be used in any domestic or commercial buildings providing the perfect all-weather and water protection.

Benefits

  • Low styrene emission resulting in lower styrene levels in working atmospheres
  • Improved water resistance
  • Long-lasting & durable
  • Heat & fire resistant
  • Resists all foot traffic
  • Storm & frost-proof
  • Supplied in 10kg and 20kg tins

Code 4 Lead Flashing Roll – 6m x 300mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

TIL-R Classic Hip Support Tray 1.2m

TIL-R Classic Hip Support Tray 1.2m has been designed to support hip tiles along the hip line of the roof, without the need for mixing and carrying mortar to bed down the cut hip tiles saving time and reducing labour costs. Available for delivery across the UK. Buy online now.

 

Quick and easy to install TIL-R Classic Hip Trays are designed to support hip tiles and give a secure and discreet solution once installed, the carefully thought out shape of the TIL-R classic Hip Tray maximises air flow keeping the moisture out and makes it more manoeuvrable during installation and transport.

Do I need mortar to fix the Hip Trays?
TIL-R Classic Hip Trays are a dry fix product meaning you do not need any mortar to fix them, saving time and reducing labour costs.

Are the TIL-R Classic Hip Trays lightweight?
Coming in at 0.5kg the TIL-R Classic Hip Trays are incredibly lightweight especially when compared to a mortar solution.

How long is the warranty on the Classic Hip Trays?
The TIL-R Classic Hip Support Tray is included in the SIG ONE Warranty, covering your pitched roofing products performance for 15 years.

Length – 1.2m
Weight – 0.5kg
Material – Re-constituted PVC

 

TIL- R Universal Dry Fix Ridge Roll Kit

TIL-R Universal Dry Fix Ridge Kits are a high quality, great value, mechanically fixed solution which are suitable for most ridge and hip applications. Note Additional components may be required for hips. TIL-R Universal Dry Fix Ridge Kits secure ridge tiles at the roof apex, and are resistant to wind uplift and water penetration and are ventilated to conform to BS 5534:2014 and BS 8612:2018 requirements.

Pack Contents – 6m x Ridge Roll

– 10 x Ridge Batten Brackets

– 13 x Ridge Unions (polyethylene) with 39 Union Clips (polyamide)

– 13 x 100mm Stainless Steel Screws

– 13 x Stainless Steel Clamping Plates

– 13 x A2 Stainless Steel & EPDM Sealing Washers

VELUX EDL Slate Flashing

When installing a VELUX roofing window into man-made or natural slate up to 8mm thick, then the VELUX EDL Slate Flashing is the perfect choice.

  • Flashing for installing VELUX roof window into slate up to 8mm thick
  • Not for use with interlocking slates, you will need EDW flashing
  • For use on roof pitches between 15 º and 90 º

VELUX GGL 2070 White Painted Centre Pivot Roof Windows with Laminated Safety Glazing

The classic VELUX roof window is operated by a convenient top control bar that allows you to open and close the window even with furniture placed underneath it. It also features a ventilation bar so you can air out your room but keep the window closed.

  • White Painted
  • Laminated Safety Glazing
  • Convenient top opening
  • Easy to rotate and clean the outer glass
  • Integrated ventilation behind the control bar
  • Ventilation filter protects against dust and insects

 

VELUX GGU SK06 Smoke Vent Window SD0L140

Smoke-ventilation roof windows for sloping roofs with integrated motor are CE-marked in compliance with the European standard for smoke and heat exhaust ventilators EN 12101-2.

Benefits

  • Opens to 85 ° within 60 seconds
  • Comfort ventilation possible at the touch of a button
  • Complete control system for single or groups of windows
  • Suitable for roof pitches 15 – 90 °

SD0L140 – GGU 0070 roof window + flashings for slate up to 8mm thick

SK06 – 114×118

 

Code 4 Lead Flashing Roll – 6m x 390mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg