Medium Density Fibreboard (MDF) is an engineered wood product with a smooth surface and uniform density core ideal for moulding, shaping, cutting and routing. MDF board can be easily painted, cut, machined and cleanly drilled without splintering or chipping. MDF sheets come in a wide range of sizes and thicknesses.
QMG Variable Size: 12mm x 2400mm x 1200mm
Marine Plywood Sheet 12mm x 2400mm x 1200mm
Marine plywood or just marine ply is used as a building material in marine setting, such as on ships or at docks. Marine ply performs well in humid or wet conditions or anywhere it will receive prolonged exposure to moisture. Unlike most woods, it will also resist the bending, warping or delaminating which can often result from too much moisture.
MDF Lite 12mm x 2400mm x 1200mm
Lite MDF is an incredibly versatile interior panel, with a high internal bond strength, used extensively throughout the construction and furniture industries, which is up to 20% lighter than standard MDF. Convenient installation with glues and screws. Suitable for internal use only. Conforms to the latest European low emission standards E1.
Green Moisture Risit MDF Lite 12mm x 2400mm x 1200mm
Moisture resistant MDF is an incredibly versatile panel, with a high internal bond strength, used extensively throughout the construction and furniture industries, for interior applications that may be subject to occasional wetting or humidity.
Structural Hardwood Plywood 12mm x 2400mm x 1200mm
A quality hardwood structural plywood that is suitable for a variety of applications, including walls, floors and roofs. Structural plywood must be 9mm or above
Hardwood Plywood BB Graded FSC 12mm x 2400mm x 1200mm
Hardwood Plywood BB/BB Grade FSC Birch Plywood is a high quality multi-ply panel with superior physical and mechanical properties. Known for its consistent strength, fine grain texture and ease of finishing. Conforms to EN13986 (E1) EN314-2
Shuttering Plywood Sheet 12mm x 2400mm x 1200mm
Shuttering Plywood is a highly densified plywood with a smooth film coating on both sides of the faces and is used primarily for cement formworks during construction. What I mean by densified is that atleast 9 layers of core veneers (10 in the case of ours) are pressed in a high pressure pressing machine at high temperatures.
