Unifix Drywall Screw 60mm Bx 1000

Unifix Drywall Screws are ideal for use with Plasterboard, Dry Lining, Wood and Metal Channel. They have a deep Pozi Recess which helps reduce dropped or misaligned screws. They are made from Hardened Steel with a corrosion resistant finish. The Bugle Head is designed for application versatility. It gives a flush countersink with no paper tearing.

Kingspan Kooltherm K108 Cavity Insulation Board PK8 450mm x 1200MM x 60mm

Kingspan Kooltherm K108 Cavity Board is a premium performance lower lambda insulation with a rigid thermoset fibre-free phenolic core. It is faced on both sides with a low emissivity composite foil facing and is used in partially filled cavity walls. Thermal conductivity – 0.018 W/m.K Facings – Composite foil Core – Premium performance lower-lambda rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP). Board size – 1200mm x 450mm

Kingspan Kooltherm K118 Insulation Plasterboard 1200mm x 2400MM x 60mm

Kingspan Kooltherm K118 Insulated Plasterboard is a premium performance, lower lambda internal wall insulation, with a fibre-free rigid thermoset phenolic core. Kooltherm K118 has a 12.5mm plasterboard bonded to its front surface and a composite foil based facing on its reverse surface. It is suitable for mechanically fixed or plaster dab / adhesive bonded dry-lining. Thermal conductivity – 0.018 W/m.K

Quinn Therm PIR Insulation Board 1200mm x 2400mm x 60mm

Quinn Therm PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing. The high compressive strength of Quinn Therm QF enables it to withstand the dead and imposed loads transmitted through the floor. Quinn Therm PIR is suitable for new build and refurbishments projects in both domestic and commercial build. With specific properties that optimise the performance of underfloor heating. For suspended timber floors in particular, Quinn Therm PIR reduces heat loss by an air infiltration method, making it the ideal solution for upgrading the thermal performance of existing floors. These low emissivity facings increases its thermal resistance of unventilated air space adjacent to the insulation, improving the roof’s overall thermal performance. Designed for warm pitched or ventilated cold flat roof constructions on new build projects or on refurbishment projects where the roof is to be stripped and re-covered

Quinn Therm QW Cavity Wall Insulation Board 1200mm x 450mm x 60mm

Quinn Therm QW Cavity Wall PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing, for use in partial fill cavity wall applications. The low emissivity foil facings increases the thermal resistance of the residual cavity and reducing the overall U-value of the wall. The good dimensional tolerances of the QW Cavity Wall PIR Insulation board enabling it to be tightly butted to form a continuous layer of insulation.

Celotex CG5000 Cavity Insulation Board 450mm x 1200mm x 60mm

Celotex CG5000 is especially designed for partial fill cavity wall insulation, offering great thermal performance due to substantial R and U values, with decreased board thickness and lower emissivity values due to the aluminum foil facings on both sides of the PIR core. This set of products presents and innovative solution in cavity wall insulation, offering considerable fire resistance, achieving an A+ rating and a Class 0 fire performance throughout the entire construction.

Celotex TB4000 Range Insulation Board 1200mm x 2400mm x 60mm

TB4000 is targeted at cut-to-fit applications between rafters or joists and enables users to achieve lower U-values with a single layer of insulation than has previously been possible. It is also appropriate for use in floors and walls. With low emissivity foil facings, TB4030 is manufactured from rigid polyisocyanurate (PIR) using a blend of blowing agents that have zero ozone depletion potential (zero ODP) and low global warming potential (GWP).

Celotex GA4000 PIR Insulation Board 1200mm x 2400mm x 60mm

Celotex GA4000is a multi-purpose insulation board that provides solution to overcome from the localized thermal bridges problem. Featuring a low emissivity foil facings, this board has been manufactured from tough polyisocyanurate (PIR) by using a perfect mix of certain blowing agents which acquires zero ozone depletion potential (zero ODP) and a low global warming impact (GWP). Celotex GA4050 is suitable for use in a number of applications including roof, wall and floor systems.