Eurothane GP is a general purpose PIR insulation board. Applications include: Pitched Roofs, Solid Masonry Walls, Timber Framed & Steel Framed Systems, Floors. Contains low emissivity foil facings. Thermal Conductivity 0.022 W/mK. Recticel
QMG Variable Size: 90mm
Quinn Therm PIR Insulation Board 1200mm x 2400mm x 90mm
Quinn Therm PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing. The high compressive strength of Quinn Therm QF enables it to withstand the dead and imposed loads transmitted through the floor. Quinn Therm PIR is suitable for new build and refurbishments projects in both domestic and commercial build. With specific properties that optimise the performance of underfloor heating. For suspended timber floors in particular, Quinn Therm PIR reduces heat loss by an air infiltration method, making it the ideal solution for upgrading the thermal performance of existing floors. These low emissivity facings increases its thermal resistance of unventilated air space adjacent to the insulation, improving the roof’s overall thermal performance. Designed for warm pitched or ventilated cold flat roof constructions on new build projects or on refurbishment projects where the roof is to be stripped and re-covered
Quinn Therm QW Cavity Wall Insulation Board 1200mm x 450mm x 90mm
Quinn Therm QW Cavity Wall PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing, for use in partial fill cavity wall applications. The low emissivity foil facings increases the thermal resistance of the residual cavity and reducing the overall U-value of the wall. The good dimensional tolerances of the QW Cavity Wall PIR Insulation board enabling it to be tightly butted to form a continuous layer of insulation.
90mm PIR Insulation Board 2400mm x 1200mm (8′ x 4′)
PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance. If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.
Use & Application
The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:
- Pitched roofs & cold flat roofs
- Timber frame walls & solid walls
- Excellent thermal & fire performance
- Environmentally friendly
- Durable and maintenance-free
- Provides a cost-effective mean of reducing CO2 emissions
|Thermal Conductivity||0.022 w/mK|
Rockwool Flexi 1200mm x 600mm x 90mm
Rockwool Flexi is a unique acoustic insulation product with a patented flexible edge along one side and is part of the Rockwool SoundPro range. This unique Flexi edge is produced using patented technology to ensure a perfect fit is maintained between the product and its supporting framework. This ensures the insulation’s integrity. Flexi is designed for a host of applications where perfect fitting insulation is essential; in walls, partitions, floors and roofs. The ‘Flexi’ edge allows the product to be tightly fitted between timber and metal frames, without the need for cutting or waste.
Celotex TB4000 Range Insulation Board 1200mm x 2400mm x 90mm
TB4000 is targeted at cut-to-fit applications between rafters or joists and enables users to achieve lower U-values with a single layer of insulation than has previously been possible. It is also appropriate for use in floors and walls. With low emissivity foil facings, TB4030 is manufactured from rigid polyisocyanurate (PIR) using a blend of blowing agents that have zero ozone depletion potential (zero ODP) and low global warming potential (GWP).
Celotex GA4000 PIR Insulation Board 1200mm x 2400mm x 90mm
Celotex GA4000 is a multi-purpose insulation board that provides solution to overcome from the localized thermal bridges problem. Featuring a low emissivity foil facings, this board has been manufactured from tough polyisocyanurate (PIR) by using a perfect mix of certain blowing agents which acquires zero ozone depletion potential (zero ODP) and a low global warming impact (GWP). Celotex GA4050 is suitable for use in a number of applications including roof, wall and floor systems.
Knauf Earthwool Frametherm Roll 32 2 x 570mm x 4500mm x 90mm 5.13m2
Earthwool Frametherm Insulation Roll by Knauf is a resilient, non-combustible product for timber frames. Used for friction-fitting between timber studs and rafters, the roll is made of glass mineral wool material, ensuring durability.
Knauf Earthwool Frametherm Roll 32 3 x 380mm x 4500mm x 90mm 5.13m2
For the thermal and acoustic insulation of external and separating walls in timber frame and ‘warm roof’ construction. FrameTherm Roll consists of a resilient, unfaced, non-combustible glass mineral wool quilt Frametherm is rot proof, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria FrameTherm Roll is free from CFCs, HCFCs and any other material with ozone depletion potential in their manufacture and content and represents no known threat to the environment FrameTherm Roll 32 has a thermal conductivity of 0.032 W/mK Sized to friction fit between studs at 600mm centres Easy to handle and install with no gaps between adjacent rolls All dimensions are nominal
Knauf Earthwool Frametherm Roll 35 2 x 570mm x 6000mm x 90mm 6.84m2
Earthwool FrameTherm Rolls are used for the thermal insulation of external walls and warm roofs in timber frame construction and are friction fitted between studs and rafters. Earthwool FrameTherm Rolls are resilient, non-combustible, glass mineral wool products, supplied at 570mm wide to suit common timber stud centres Earthwool FrameTherm Roll 35 has a thermal conductivity of 0.035 W/mK Sized to friction fit between studs at 600mm centres Easy to handle and install with no gaps between adjacent rolls